Classic small suit production technology sharing of clothing production
1. The front horizontal pioneer is more than 1-1.5cm.
2. The province is 84A size, and the province is controlled at 4cm.
3. With the size of the 84A body size, the side seam position of the template frame moves 1cm after 1/2.
Second, front film
1. Transfer the amount of 1/2 of the chest to the front. (See the red line)
2. The degeneration of the mouth becomes longer, and the large quantity is uniformly provided to the sleeve.
The first film after the second transfer is as shown in the figure at this time. At this time, the amount of chest saving is 2cm
3. In order to ensure the balance of clothing, borrow the provincial highway in Japan’s eighth -generation prototype, and draw the relationship between the provincial highway, size, and the relationship between the provincial roads in the proportion! Caizhi clothing technology tens of thousands G clothing tutorial WeChat: 975851096
4. Draw the segmentation line according to the requirements of the style (as shown in the red line on the left)
5. Incorporate the provincial position into the segmentation line (as shown in the red line on the right)
6. Convert the sideways of the side seam into the gap in the circle in the picture in the picture of the dark province, and keep it!
7. Put the conversion side seam back to the template to observe: The point of the province in the segmentation line exceeds the chest height! What you want is this effect!
8. In order to show the curve of the suit with a suit, small suits are commonly used in hidden provinces in the refuting line.
9. Transfer 1/2 of the remaining chest province to the province (green line A)
10. Create the outer head of the barrier to the province to collect 0.3–0.5cm province (Green Line B)
Third, the back film
1. The provincial highway ratio of the eighth -generation prototype of Japan to draw post -film and provincial highway
2. Incorporate the provincial highway in the template into the segmentation line.
3. The back is often hanging, and the back waist is empty. The province can be uniformly collected in the ultra -back of the green dotted coil, and a total of 0.4cm can be closed. After the province is provided in the back, the sewing in the back needs to be repaired, otherwise the back will rise!
Fourth, sleeve function
1. Under the premise that the back width and the sleeve fertilizer are not changed, the functionality of the sleeve fertilizer is increased.
2. Inside the red deficiency coil A and B outer arcs, increase the amount of sleeve lifting
3. At the C, the green dotted coil C, the mountain is the top of the mountain. After the molding, the visual sleeve fertilizer will be small!
4. The red line is ordinary sleeve mountain, and the white line is the shape of the sleeve mountain!