For my waist, I started with Netease strictly selected 3D suspension waist and a multi -functional ergonomic chair

0 Comments

For my waist, I started with Netease strictly selected 3D suspension waist and a multi -functional ergonomic chair

Foreword:

In May of this year, after my father checked the lumbar disc herniation, I was worried about my waist. Although I have started to start with ergonomic chairs before, ergonomics is continuously developing after all, and my previous chair waist pillow is not very satisfied with me. After many comparisons and my friend’s word -of -mouth recommendation, I finally started a ergonomic chair with adaptive suspension waist pillows. It is the Netease strict selection of 3D suspension waist that I want to introduce to you today. Do a detailed sharing from the aspects of unpacking, installation, functional experience, and sitting feelings.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Open the box & installation:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Let’s take a look at each component first.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The five -star foot wheel uses nylon+glass fiber. You can see that there are still many enhanced tendons in the inside. It is light, strong, and durable. There is also a non -slip design on the outside of the foot wheel. You can usually rest on the outside of the foot wheel. Essence

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The wheels are also made of nylon+glass fiber, and the surface is PU.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The air rod uses 2.0 seamless steel pipes and passes TUV4 certification. The safety is full.

Here we must add a small knowledge: the structure of the air rod (also known as the air pressure rod) is as follows. The internal cylinder is filled with high purity inert gas. The cylinder consists of the upper and lower end cover, piston rod, piston, and cylinder cylinder. When the human body is sitting on the chair, the piston rod pressures a certain pressure through the piston rod, and the piston will put pressure on the gas in the cylinder. The pressure of the gas is compressed, the height of the chair will decrease, and otherwise it will rise.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

In order to ensure the quality and safety of air rods, the industry has certification standards such as SGS/BIFMA/TUV, and the above standards are trusted through the above standards. The TUV certification is a security certification certificate provided by Germany (TUV) for many testing of wear, pressure resistance, durability, etc. for component product technology. After strict and precise technology testing, the components of the tuv logo can be exempted from inspection in Germany and EU countries, and at the same time they are qualified for market push.

The headrest is made of polypropylene+glass fiber. The surface is a velvet special network, lightweight and breathable.

The chassis uses a 3.0mm thick explosion -proof steel plate, which is solidly used to enhance safety.

There are hidden anecades under the cushion. This is a design I like very much. When I lie down, I can put my feet on it, which is more comfortable.

The back, handrail and waist are integrated design, eliminating the trouble of the armrest installation. The material is nylon, glass fiber, velvet special network and PU.

This NetEase hanging waist is very good at opening the box to the box of multi -functional ergonomic transit chairs. All components inside are protected by cardboard, sponge foam or air bubble film, and the packaging box is also very strong.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Let’s start installation:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

First put the wheels into the five -star foot wheel. This step is very simple. Press the wheels on the foot of the wheels vertically. Then put the center hole in the bottom of the head wheel at the bottom of the air rod.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Then pad the cushion in the box, connect the iron sheet to the holes of the back chassis, and remove the screws in the hardware bag in the box and twist it.

Then put the center hole in the chassis vertically, and then install the headrest, and you’re done!

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

In all the ergonomic chairs I have started, it is the easiest to install. It is less than 1 hour from the box to the installation. There is no pressure on the single installation.

Functional experience:

Next, I will show all its functions, including high adjustment, handrail adjustment, backward adjustment, headrest adjustment, waist pillow adjustment, etc.

The height and adjustment of the seat:

The right side of the right side of the cushion is responsible for adjusting the height of the seat. Sitting on the chair and pulling up the chair can reduce the chair surface. Leaving the chair up and pulling up to let the chair surface rise, the adjustment range is 6cm. Essence

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

In addition, the front and rear (sitting deep) can also be adjusted. After the inside paddle on the left side of the cushion is lifted up, the cushion can slide back and forth, the adjustment range is 6cm. From 150cm to 190cm height, different heights can sit comfortably.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Handlerants:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Netease hanging waist with a multi -functional human science transfer hand armrest design is also very interesting. It can be lifted up, so that the chair can be placed under the table and less space is occupied. In addition, you can adjust and rotate up and down, and then match the PU surface to ensure comfortable support for elbows.

Backward:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Plusing up the left outer paddles below the cushion can be lock back in the back, and the lock is lifted after recovery. The status in the figure is to unlock the lock state.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Lie back to the back, and the back of the chair is leaning.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Isn’t it comfortable to the ground when lying on your back? It’s okay, wait for me to open this PU soft bag to prevent sliding foot.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The calf is resting on the foot, and it is a lot comfortable to lie down.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Headrest adjustment:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The headrest supports up and down adjustment, the amplitude is 5cm, and the up and down rotation is 35 °. You can sit high and flexibly adjust according to different users.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Automatic suspension adjustment of the waist pillow:

It can be seen that the waist pillow itself can float up and down, but this is not the point.

The point is that this waist pillow can be adjusted freely with the back and forth of the waist, providing dynamic protection support. Look, when I sit down and touch the waist pillow on the waist, it automatically falls and let the curved surface close to my waist, so that the waist pillow is supported by the waist pillow. This is where I appreciate it most.

Sitting experience:

At present, this NetEase hanging waist is two weeks after the multi -functional ergonomic transit chair, and the experience is very good. The cushion is widely designed with a large curved surface. When you sit down, the chair surface will change the support angle to spread the body pressure quickly to the entire chair surface to get better decompression support. It uses a velvet blee web, which has a very good sense of wrapping. The back and waist back of the chair and waist can provide accurate and comfortable support. It is also cool and breathable in summer.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

The PU soft bag expansion and flipping the foot is also a design I like very much. When I was tired and I didn’t want to get up, I pulled out the foot, lay back on the back, and made an eye massage by the way. Full of energy.

Summarize:

This NetEase strict 3D suspension waist is impressed by the multi -functional ergonomic chair:

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Solid materials, fine workmanship, convenient installation, and reasonable design;

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

3D suspended waist pillow can be freely adjusted with waist floating, always fit the waist care, and provide dynamic package support;

PU soft bag retracting and flipping foot is comfortable and practical, so that you can get a better experience when lying on your back;

4D armrests can realize the front and back, left, left, and up and down, provide comfortable support for the elbow, and can also get up to the table to save more space;

High -performance imported mesh cloth is strong and wear -resistant, providing users with a general supporting sense of latex, with large curved design, comfortable sitting;

The headrest is large and flexible, making the neck more comfortable.

为了我的腰,我入手了网易严选3D悬挂腰靠多功能人体工学椅

Coupled with the height of the seat height and the backward angle, it is a rare high -quality ergonomic chair. Whether it is daily office, learning or home leisure, it is perfect.

Product Recommendation: Swivel Manager Work & Rest Chair with Leg Rest Support and Flexible Lumbar Support Multi-function Ergonomic Office Mesh Modern