Three minutes of reading, the craftsman is you! (Detailed explanation of relief carving process)
The relief is a type of carvings. The sculptor carved out the image he wanted to shape on a tablet, causing it to get out of the plane of the original material. The relief is the product of the combination of sculpture and painting. It uses compression to deal with objects. It can show three -dimensional space by perspective and other factors, and only for one or two sides to watch.
Process and exquisite case appreciation
The relief is the image shape of the image on the surface of the stone (the opposite to the Shen sculpture), which is a semi -stand -up carving. Depending on the degree of depth of the image modeling, it can be divided into unbair and high reliefs.
Belly -relief is a single -level statue, which is relatively single; high relief is a multi -level statue, and the content is relatively complicated. The carving skills and expression of the relief are basically the same as that of round carvings.
Below we will use the green stone relief to comprehensively analyze the entire process of making traditional bluestone reliefs.
First of all, choose stone to confirm the required blu -stone stone. And you need to break down the size of the stone stone slate according to the drawings, to achieve the beauty of the actual picture of the bluestone relief and the actual green stone can be achieved.
Secondly, find a professional craftsman to find the right venue to lay off the bluestone slate, and use the machine to repair it again, so that there is no too much gap.
Furthermore, amplify the drawn drawings to one to one ratio, and evenly brush the glue on the quiche slate. Note that before brushing the glue, you must first roll the drawings from one end to brush the glue from one end. French, small bluestone reliefs can be directly paved.
Immediately after the drawing was pasted, the worker master began to use the machine to portray the lines on the white drawing drawings on the slate to achieve clearing and seeing the artistic conception of the picture.
Then according to the design draft 1: 1 proofing, print a small drawing of several equal ratios, it is divided into craftsmanship and workers, a hand -to -hand, and the workers’ masters can achieve the purpose of regulating each other through small pictures when making small pictures.
Then, after getting the drawings, we must start from top to bottom, different levels, from shallow to deep sculpting out of the outline corresponding to the depth of the picture scene, and then engraved the open space, that is, the space of the screen, such as the sky, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, the ground, Lakes and other. Let all three -dimensional scenes emerge.
In the floating part, according to the front and back of the scene, from the distance, the relationship between staggered, the corresponding height, thickness, and depth of large levels are carved. When making large levels, when portraying the open space, be sure to pay attention to whether the open space is directly described or a purposeful tilting portrayal to avoid excessive painting that causes excessive three -dimensional scenery to suspend it.
Then, enter the stage of “dividing the large side, dividing the film industry”. When dividing the large surface, first carve the basic shape of the object, and then accurately distribute the general proportional structure of the image, and finally divide the level and divide the details.
Then draw the characteristics of the image image and the basic spirit (such as the expression of the character). When making the above objects, pay attention to the film industry of the object. The quality of the film industry represents the time and artistic conception of this picture.
Finally, it is repairing and polishing.
Use the appropriate sand wheel machine to polish the high point of the picture, and then according to the distance of the picture, the color mood needs to polish the color shades of the slate, just right. Before the customer acceptance, the company’s quality supervision department conducts sculpture quality inspection. Sculpture installation: Make steel skeleton according to the installation scenario, size, etc. and welded and installed. During the examination and inspection, the arts and craftsmen will be processed locally after the relief installation is completed and the installation acceptance is performed.
The above is the production project of relief
Welcome to the axis if you have any errors