What do you think of household smart water meters? How to look at the ton number of smart water meters?


How to read ordinary water meters

The old -fashioned water meter is divided into four small black watches and four small red watches, and clockwise is: 1000/100/10/1/0.1/0.01/0.001/0.0001. The black watch indicates that it is greater than one ton, and the red table indicates less than one ton. For example, the numbers referred to the pointers on these 8 small tables are: 1, 2, 3, 4, 5, 6, 7, 8. Then the ton of water with water is: 1234.5678 tons.

How to look at the ton number of smart water meters?

1. “M3” represents the metering unit (cubic meter) 2. The scale of “red instrument” represents the measurement reading of the decimal point. The bottom of the table is four instruments: When the parties’ water meters displayed 6562 in the “red instrument”, the reading of the water meter was 10.6562 tons. 3. Don’t care about the red -type wheels. From X1, X10, X100, X1000, they start to look at it, one digit, ten, hundred, thousands. If X1 is 5, X10 is 2, x100 gear is 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, and x100 gear. Then the reading is 325. Each gear is a small reading. For example, the needle of the X10 gear is on the side of 3 but not to 3, then read 2, and the other gears are the same.


How to choose a smart water meter?

At present, the excellent intelligent water meter should have the following characteristics: the first is the external water meter with waterproof moisture -proof; the second is the non -contact IC card water meter; the third with water meter with a recovery function; the fourth is the economic and practical, cost -effective water meter The fifth is the water meter of enterprises with independent intellectual property rights, strong corporate strength, and good after -sales service.